Find the Right Machine For You
Ryetec
Home PageProducts and EquipmentAbout RyetecNews and EventsPhotos and MoviesContact Us

Multi-Use 4 in 1 Flail Mower

Standard specification includes:
Four modes of operation:

i) Standard in-line flail mower
ii) Fully offset verge mower (left hand standard, right hand option)
iii) To -65° angle ditch mower
iv) To +90° angle bank and hedge mower
Hydraulic offset
Hydraulic incline of mowing head
MU120
MU120
MU160
MU160

Wide range of models

Mowers come in standard (Park) and heavy duty (Professional) models to suit tractors from 20 - 125hp. Cutting widths from 1.2m to 2.3m. All models except MU120 feature a choice of heavy cast hammer flails or heavy duty grass flails and are fitted to the flail rotor with a 14mm diameter pin and cast mounting flanges. All Professional models feature a double skin, opening rear cover and inboard rotor and roller bearings as standard.


Fully floating

Fully floating 3 point hitch on all models and on Professional models a unique chain mounting of the head levelling ram allows the heavy duty mowing head to self-level on its own roller allowing the mower to follow the ground contours and keep a uniform cutting height. These systems also remove stress from the mower linkage and frame during the mowing operation. Brass bushing and grease points on all pivot points allow for easy maintenance and trouble free operation
MU160
MU160

Model Cutting width(A) (mm) Weight (kg) Type of flail/ hammer Minimum tractor hp Fully floating head Double skin Hinged opening cover
PARK MU120
1150
280
P 48 x T15 (in pairs)
20
N/A
O
N/A
MU130
1250
320
H 16 x T1/48 x T2
25
N/A
O
N/A
MU150
1450
370
H 20 x T1/60 x T2
30
N/A
O
N/A
MU170
1650
410
H 24 x T1/72 x T2
40
tick
O
N/A
PROF MU160
1600
530
H 20 x T1/60 x T2
50
tick
tick
tick
MU180
1800
550
H 24 x T1/72 x T2
60
tick
tick
tick
MU200
1950
570
H 28 x T1/84 x T2
70
tick
tick
tick
MU230
2250
620
H 36 x T1/108 x T2
80
tick
tick
tick

tick Standard
O Optional
(P Single paddle flail as standard. Can be interchanged with small back to back Y flails.
H Heavy duty cast hammer flail as standard. Can be interchanged with heavy duty back to back Y flails.)

Tractor requirements

  • 540 rpm PTO shaft
  • 2 x double acting spool valves, 1 for hydraulic offset, 1 for inclination of head

Accessories/Spares

T1 08-21-83 Hammer flails
T2 08-21-10 Part Y flails(use in 3s)
T3 08-21-13 Half Y flails(use in pairs)

Model A(m) B(m) C(m) D(m) E(m) F(m)

G(m)
P A R K MU120 1.15 1.05 0.65 1.85 0.90 1.35 1.60
MU130 1.25 1.20 0.65 1.95 1.10 1.55 1.80
MU150 1.45 1.35 0.75 2.05 1.10 1.55 1.80
MU170 1.65 1.55 0.75 2.25 1.10 1.55 1.80
P R O F MU160 1.60 1.55 0.65 2.25 1.10 1.55 1.80
MU180 1.80 1.70 0.75 2.35 1.10 1.55 1.80
MU200 1.95 1.85 0.85 2.40 1.10 1.55 1.80
MU230 2.25 1.95 0.95 2.65 1.10 1.55 1.85