Contractor Mini; Heavy Duty Flail Mowers for Compact Tractors

Contractor Mini Heavy Duty Flail Mower for Compact Tractors

Designed for heavy duty mowing operation

Cuts long wet grass effectively
Heavy hammer flails cut material up to 50mm (2”) in diameter and a straight cutting edge gives excellent finish
Hydraulic offset (optional on standard machines) gives good manoeuvrability around obstacles
Quiet in operation
Even spread of grass cuttings
Low profile design, allows for work up to hedge rows and fence lines with minimum risk of damage

Contractor Mini; Heavy Duty Flail Mowers for Compact Tractors

Fixed and floating positions for linkage mounting allow the machine to follow ground contours
Heavy duty gearbox with solid oil immersed output shaft
Remote greasers on rotor bearings
Easily viewed by operator

Front or rear mounting
The Contractor Mini range has been designed for maximum flexibility and is available in front or rear mounting on all standard build CM models. Option not available on S models
Large range with two build types

Standard build

Cutting widths from 0.95 to 1.75m
Heavy duty hammer flails with back to back grass flail option (for lower requirement)
Full width, height adjustable rear roller and skids
Heavy duty gearbox with overrun clutch
Cat 1 offset linkage with hydraulic option

Heavier ‘S’ build

Cutting widths from 1.15 to 2.15m
Heavy duty hammer flails with back to back grass flail option (for lower power requirement)
Full width, height adjustable rear roller and skids
Chain stone guard
Heavy duty (60hp) gearbox with overrun clutch and oil immersed drive shaft
Cat 1/2 3 point hitch
Hydraulic offset linkage

	Model	Working Width	Weight (kg)	No of hammer flails	Min/max tractor HP	Front Mounting	Double Skin	Hyd. Offset
Standard Models	CM100	950	165	12	15 - 25
	CM130	1250	200	16	15 - 30
	CM150	1450	215	18	25 - 40
	CM180	1750	240	22	25 - 40
Super 'S' Models	CM120S	1150	355	10	20 - 60
	CM140S	1350	390	14	25 - 60
	CM150S	1450	390	14	25 - 60
	CM160S	1550	410	14	30 - 60
	CM180S	1750	430	16	35 - 60
	CM200S	1950	470	18	35 - 60
	CM220S	2150	490	20	40 - 60

= Optional Extra
Standard specification includes skids and 540rpm PTO speed on CM and CMS model
Tractors must be fitted with a double acting spool valve to operate hydraulic offset linkage

Flails
The Contractor Mini flail hammer can cut any material up to 2” (50mm in diameter) and its straight cutting edge leaves a perfect finish. The flail is easily sharpened in situ to extend its working life.

CM standard build machines

Type 1
Heavy paddle flail

CMS heavy build machines

X75700001
Heavy paddle flail

All machines benefit from an offset linkage of 300mm. This is hydraulic on CMS models and manual with a hydraulic option on CM machines.

Mowers Mower Collectors Scarifier Collectors Sidearm Flail Mowers Multi-Use 4 in 1 Flail Mowers
Hedge and Verge Mowers Forestry Mulchers Log Splitters Vacuum Collector Sprayers