Multi-Use 4 in 1 Fully Offset Flail Mower

FOUR modes of operation;

Standard in-line flail mower
Fully offset verge mower
(left hand standard, right hand option)
To -60E angle ditch mower
To +90Eangle bank and hedge mower

Standard specification includes;

Hydraulic offset
Hydraulic angling of mowing head
5 Position opening rear door
Outboard mounted gearbox to allow full cutting width outside tractor wheels

Wide range of models;
These Multi-Use mowers come in standard heavy duty build to suit tractors from 60-125hp. Cutting widths from 1.6m to 2.5m. All models feature a standard heavy cast hammer flail or optional heavy duty back to back grass flail and are fitted to the flail rotor with a 16mm diameter pin and cast mounting flanges. 1.6/1.8 & 2 metre models feature a double skin. All models have 2 rows of counter blades for shredding and volume reduction of cut material, 3 position opening rear cover and inboard rotor and roller bearings as standard. The outboard mounted gearbox allows full mowing width outside the tractor wheels

Fully floating
3 point hitch on all models and fixed/floating positions of the head levelling ram allow the Multi-Use’s heavy duty mowing head to self-level on its own roller. This enables the mower to follow the ground contours and keep a uniform cutting height. These systems also remove stress from the mower linkage and frame during operation. Grease points on all linkage pivots allow for easy maintenance and trouble free operation. Adjustable compression springs control the break back system which prevents damage if the mowing head hits an obstruction. The rear roller and rotor benefit from internally mounted bearings with double seal protection.

Vertical Head

Model	Cutting width (mm)	Weight (kg)	Type of flail/Hammer or Y flailX number fitted	Min tractor hp	Fully floating head	Double skin	Break away device	Hinged opening cover
MUAO 160	1550	760	H x 16 or (Y x 48)	60
MUAO 180	1750	780	H x 18 or (Y x 54)	70
MUAO 200	1950	800	H x 18 or (Y x 54)	80
MUAO 220	2150	820	H x 20 or (Y x 60)	100		X
MUAO 250	2450	910	H x 24 or (Y x 72)	120		X

	Standard
X	Not Available
H	Heavy duty cast hammer flail as standard. Can be interchanged with heavy duty back to back Y flails.

Tractor requirements;

540 rpm PTO shaft
2 x double acting spool valves, 1 for hydraulic offset, 1 for inclination of head
Options;
Double acting spool valve with cable control

Model	A(m)	B(m)	C(m)	D(m)	E(m)
MUAO160	2.80	1.64	1.62	0.42	1.70
MUAO180	3.00	1.64	1.82	0.43	1.70
MUAO200	3.20	1.64	2.02	0.43	1.70
MUAO220	3.40	1.64	2.22	0.43	1.70
MUAO250	3.70	1.64	2.52	0.43	1.70

Mowers Mower Collectors Scarifier Collectors Sidearm Flail Mowers Multi-Use 4 in 1 Flail Mowers
Hedge and Verge Mowers Forestry Mulchers Log Splitters Vacuum Collector Sprayers