Find the Right Machine For You
Ryetec
Home PageProducts and EquipmentAbout RyetecNews and EventsPhotos and MoviesContact Us

Mini Park and Super Light Compact Sidearm Flail Mowers

Two different ranges

Mini Park (MP)


 - for tractors from 12hp
reach from 2.75m
Super Light (SL) - for tractors from 20hp
reach from 3.20m
Hedge Trimming with MUF 160
MP300 with fingerbar
Full mowing width outside tractor tyres
SL420 Hedge cutting with flail head

Standard specification includes

  • Twin pump independent hydraulics
  • Reversible rotor
  • Cable controls
  • Mechanical break back device
  • Robust heavy duty construction
  • 5mm back to back Y flail
  • Adjustable roller on SL models
  • Optional fingerbar and rotary ditcher
  • NEW High power SL420H has 25hp head drive motor (nearly 40% increase on standard machine)
Counter balance oil tank
The MP and SL models (option on MP250, not available on SL420H) feature a unique sliding counter balance oil tank for increased stability on compact tractors when using full reach.
Tank In Tank Out
Tank In
Tank Out

Head rotation - the key to flexible hedge cutting
Ryetec sidearms have the head fitted at one end of the head (MP) or behind the head (SL). This feature allows the flail head to rotate up to 246º to cut close to the tractor in the vertical position in narrow lanes and allow the machine to level top very high hedges, whereas machines designed primarily for grass cutting have the arm mounted on top of the flail giving limiting the head angle to a maximum of 180º.

(Right) SL420 with arm mounted behind the head. This makes it capable of level topping a 3.4m (11’4”) high hedge, ie measurement ‘D’ on the table below


Specifications
Model
Reach with flail (fingerbar) m
Cutting width flail m
Weight inc. flail (kg)
No. of flails
Head motor power
Oil tank capacity (litres)
Tractor weight (kg)
Min. tractor hp
MP250†
2.75 (4.10)
0.6
290
12 x T4 (24 x T13)
16
65
700*
12
MP300
3.05 (4.40)
0.8
340
20 x T4 (40 x T15)
16
65
750*
16
SL320
3.20 (4.55)
0.9
410
40 x T15 (20 x T4)
18
75
1000*
20
SL420
3.80 (5.15)
0.9
440
40 x T15 (20 x T4)
18
75
1200*
25
SL420H
3.85 (5.15)
1.0
500
40 x T15 (20 x T4)
25
100
1500*
35

† Counter balance tank on MP250 is an optional extra
* Tractor weight indicated can include ballast


Tractor requirements for all machines
3 point linkage
540rpm PTO shaft
Specialist guarding required when using flail head on tractors without cabs.

Optional extras
Fingerbar cutting head
Standard fingerbar size is 1.8m. (1.2m and 1.5m also available - at same cost)
 Rotary ditcher MF450 (for SL320 only)

Sidearm Dimensions


SL420 with fingerbar

Flails

T15: Half Y flail

Type 4 (T4)
08-21-89
Single paddle flail
Type 13 (T13) MP250 only
08-21-86
Half Y flail, use in pairs
Type 15 (T15)
08-21-13
Half Y flail, use in pairs
Dimensions (m)
Model
A
B
C
D
E
F

G
H
I
L
M
Q
MP250
2.75
0.60
1.15
2.60
3.90
1.30
0.70
1.80
1.65
3.20
0.60
0.35
MP300
3.05
0.80
1.25
2.65
3.80
1.55
0.70
2.05
1.90
3.20
0.60
0.35
SL320
3.20
0.90
1.80
3.00
4.10
1.15
0.95
1.50
1.60
3.30
0.60
0.35
SL420
3.80
0.90
1.60
3.40
4.65
1.60
0.90
1.60
2.00
3.90
0.60
0.35
SL420H
3.85
1.00
1.65
3.40
4.70
1.60
0.90
1.65
2.05
3.95
0.75
N/A