Ryetec PHT (Power Harrow Toorbar)
The Ryetec PHT has been designed for use as a close coupled toolbar for cultivation and drilling equipment to remove any compaction caused by previous operations prior to new crop establishment in a single pass.
Our PHT Causes minimal surface ground disturbance with a large 500mm cutting disc and low disturbance point on a steering arm. The close coupled design and through the frame PTO facility allow for the mounting of PTO driven power harrows and combinations, relieving compaction and aiding drainage.
Standard Specification:
Ryetec Power Harrow Toorbar Attached
Available with either full Auto Reset or Shearbar system
3m toolbar with 6 legs & points with tungsten tips @ 500mm spacing – longer lasting points for reduced running costs & downtime.
15mm Hardox legs that are depth adjustable to 300mm – for high resistance to damage and wear with accurate and easy no tool depth adjustment.
Shearbar protection for legs – where conditions are unlikely to cause repeated obstruction of the legs (Auto reset option available).
Heavy duty pivoting discs & legs – allow for ease of manoeuvrability around obstacles, headland following and steering pressure from tracked or pivot steer tractors.
Ryetec Power Harrow Toorbar
Close coupled reach adjustable (680mm +) rear linkage – Heavy duty with hydraulic raise and lower to attach rear mounted implements, minimising rear overhang.
Through the frame PTO – ability for single shaft through frame or intermediate lay shaft and two PTO shafts to drive power harrows etc.
Umbilical transfer system – to convey hydraulic and electrical services to rear mounted implements.
Ryetec Power Harrow Toorbar attached to a combi drill
Options:
Optional Stocks Ag Seeding Equipment– ability to drill OSR & cover crops.
Rear packer roller (flat or ribbed) – for stand alone operation.
Alternative legs & points – customers preferred legs/points can be fitted.
Auto Reset – where conditions will cause repeated interference with legs.
PTO layshaft & alternative drive shafts
